Brass Pipe Fittings

Technical Specification:

  • Material: Brass BS to 2874 / 2872, CDA 360 Brass, Copper, Steel, Carbon Steel
  • Surface Plating: Natural Brass, Nickel Plated Brass, Chrome, Electro Tinned, Zinc and more.
  • Threads: ISO Metric, BSP, BSPT, NPT, NPTF, BSW, UNC, UNF etc. Any threads as per custom design.
  • Conformal Standards: BS 2874 / 2872

Size Specification:

  • Any Size Available as per Custom Specification and Requirements.

Features:

  • Male and Female threading for sanitary fitting and plumbing fitting.
  • Meets all applicable ANSI standards.
  • Standard materials are S316, brass and carbon steel.
  • Precision thread construction to ensure leak-free and reliable systems.
  • Good Corrosion resistance, Ease of installation.
  • Creates a tight seal when thread sealant is applied.
  • Extensive range of configurations, connection and sizes available.
  • Pipe threads allow for alignment.
  • Pipe threads must be sealed using approved thread sealant.

Application:

  • For sanitary fitting and pipe fittings with round flange and hexagonal flange.
  • For instrumentation and process control.
  • For any Plumbing Works.
  • Enhance the efficiency of water delivery system.
  • For use with all types of Water, Oil, Air, Natural Gas, LP-Gas Pipes.
  • Use with Brass, Steel, Iron Pipe.

Brass Pipe Fittings - Hex Head Plug

hex plug

Technical Specification:

  • Material: Brass, 316 Stainless Steel, Aluminium, Mild steel.
  • Surface Plating: Nickel, Zinc, Mild Steel, Aluminium and others on application.
  • Conformal Standard: IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1.

Threads:

  • Available in American National standard forms NPT ((ANSI/ASME B1.20.1-1983).
  • Available in other thread forms: NPTF, NPSC, NPSM, BSPT, BSPP.

Features:

  • Manufacturing facility is ISO 9001:2008.
  • All fittings are made from CF8M (316) Stainless Steel material and conform to ISO 4144 standard.
  • All threads are to ISO 7-1 (DIN2999) BSP Parallel Female, BSP Taper Male.
  • Material certificates available on request.
  • All fittings are manufactured by investment cast process, nipples produced from welded tube.
  • All items are tested & inspected prior to dispatch.
  • CE approved.
  • Fittings meet applicable chemical & physical properties.

Application:

  • Provide a means of closing off conduit fitting ports.
  • Manufactured in stainless steel to help prevent corrosion.
  • Can be installed using ordinary hand tools and require little maintenance or repair.
  • Provided in a bright, polished finish that does not require touch up or painting.

Brass Pipe Fittings - Reducing Hex Bush

hex bush

Technical Specification:

  • Material: Malleable iron per ASTM A197
  • Threads: NPT per ASME B1.20.1
  • Surface Plating: Light protective oil, Chrome, Electro Tinned or any as per custom specification.
  • Operating Temperature: -65° F to 250° F
  • Conformal Standard: IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1

Features:

  • Strong, Lightweight and Compact.
  • Available in a variety of thread combinations and connections.
  • Low to medium pressure lines.
  • Yellow brass plating. Bagged.
  • Material strong enough to minimize potential cross threading.

Application:

Application:

  • Common Applications include Horticultural, Agricultural, Irrigation, Marine & Plumbing.
  • Suitable for use above or below ground in varying operating pressures and temperatures.

Brass Pipe Fittings - Hex Adaptor

hex adaptor

Technical Specification:

  • Material:Brass
  • Threads: 1/4″ NPT Male x 1/4″ NPT Female – Machined
  • Surface Plating: Light protective oil, Chrome, Electro Tinned or any as per custom specification.
  • Operating Temperature: -65° F to 250° F
  • Conformal Standard: IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1

Features:

  • Excellent strength & ductility.
  • Corrosion resistance.
  • Good bearing properties.
  • Low magnetic permeability.
  • Black anodized for superior performance.
  • Available in a variety of thread combinations and connections.

Application:

  • Suitable for Structure Pipe, Gas Pipe, Hydraulic Pipe and Chemical Fertilizer Pipe.
  • Provide female pipe x male pipe thread connections with a hex for use with a wrench.
  • For securing the adapters to motor shafts.

Brass Pipe Fittings - Round Long Brass Nipple

brass nipple

Technical Specification:

  • Material: Brass
  • Threads: BSP, BSPT, NPT, NPSM and Metric.
  • Surface Plating: Chrome, Electro Tinned, Natural Brass or any as per custom specification.
  • Conformal Standard: IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1
  • Pressure Rating: 1200 PSI.

Features:

  • Durable and highly resistant to rust and corrosion.
  • Excellent resistance against dezincification, season cracking and pitting.
  • Meets or exceeds all applicable ANSI standards.

Application:

Application:

  • For carrying water in commercial plumbing.
  • Used in oil, gas and steam applications.
  • Designed for repairing or extending pipes and fittings.
  • For wrench to grasp.
  • For connecting two other fittings.
  • For use in water, grease, fuels, LP and natural gases, refrigeration, instrumentation and hydraulic systems.
  • Designed for low and medium pressure pipe line connections.

Brass Pipe Fittings - Hex Nipple

brass hex nipple

Technical Specification:

Technical Specification:

  • Material: Brass
  • Threads: BSP, BSPT, NPT, NPSM and Metric.
  • Surface Plating: Chrome, Electro Tinned, Natural Brass or any as per custom specification.
  • Conformal Standard: IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1
  • Pressure range: 0-250 psi

Features:

  • For corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Manufactured to industry standards for lead-free pipe fittings.
  • Tapered pipe threads are manufactured to exacting quality and standards.

Application:

  • Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines.
  • Used for connecting and extending pipes or fittings.
  • Used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.
  • Used in water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas.

Application:

  • Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines.
  • Used for connecting and extending pipes or fittings.
  • Used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.
  • Used in water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas.

Brass Pipe Fittings - Close Nipple

brass close nipple

Technical Specification:

  • Material: Brass, Copper
  • Threads: BSP, BSPT, NPT, NPSM and Metric.
  • Surface Plating: Plain, Chrome, Electro Tinned, Natural, Nickel Plated Brass or any as per custom specification.
  • Conformal Standard: IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1
  • Pressure range: 1200psi

Features:

  • Special fitting configurations and/or sizes available.
  • Unique design provides a superior noise reduction.
  • Capable of a wide range of flow settings.
  • Provide a compact male/female pipe to male/female pipe thread connection.

Application:

  • Protect valves, air tools and air components from dirt and other foreign matter.
  • Low profile has many applications for vacuum relief or pressure equalization on gear boxes, oil tanks or reservoirs.
  • Also for single acting cylinder ports.
  • Provides dual job of metering exhaust air to control cylinder or tool speed.

Brass Pipe Fittings - Square Head Plug

brass square plug

Technical Specification:

Technical Specification:

  • Material: Brass, Copper, Stainless Steel, Carbon Steels
  • Threads: BSP, BSPT, NPT, DIN, NPSM and Metric.
  • Surface Plating: Plain, Chrome, Electro Tinned, Natural, Nickel Plated Brass or any as per custom specification.
  • Conformal Standard: IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1, Military Standards.
  • Pressure range: 1200psi

Features:

Features:

  • Forged steel plugs are solid, all others are cored.
  • Designed to match rigorous quality standards.
  • Through-the-tube plugging.
  • No Pipe sheet damage and no leaks.

Application:

  • Designed to Protect Threads from Dust, Dirt, and Moisture During Low-Pressure Testing and In-Plant Handling.
  • Used for the smooth and protected appearance of the square tubes.
  • For general hydraulic pressure. Applicable to schedule pipes.
  • For low-pressure plumbing applications including air, water, natural gas, and steam.
We can manufacture and export Brass Pipe Fittings as per specifications (custom drawing and samples) for more information please Contact us